Gone are the days of 100mph tape, 550 cord, and the frustration of your marking light bundles. Envisioned after many wasted hours of prepping traditional 4” and 6" marking lights, the MARCO™ Marking Light Dispenser is an incredibly efficient and compact way to carry marking sticks for room clearing and many other applications. These disposable marking light stick dispensers take seconds to prep, rip open the foil packaging and slap the MARCO dispenser into the belt, MOLLE or Kydex carrying pouch.
The 2” marking light sticks put out the same light under night vision devices as taped up 4” or 6" marking sticks and is designed to prevent accidental breaks and glow. The MARCO holds 30 - 2" light stick that give roughly the same lumen output as a taped up 4" traditional chem stick in a package smaller than a standard M4 STANAG mag. The MARCO was designed as a one time use dispenser. Do not reload the dispenser as the light sticks often crack and become comprised.
The MARCO is perfect for night time or low level light tactical training - drop them in a line to create a visible firing line and drop one under each target to approximate target location.
IMPORTANT: Keep in original wrap until ready to use. Do not puncture or cut product. Marking Lights begin degrading once removed from wrapper. Ingredients are non-toxic and non-flammable but may cause temporary discomfort. In case of skin or eye contact rinse toughly with water. Do not drink or ingest contents. After use dispose of in refuse container. Not for use by children 12 years or younger. For inquiries on product use and safety call 1-877-430-2583
**Carrier Pouch Not Included.**
Carrying pouch is not included with the purchase of MARCO™ and is sold separately. See below of carrier options.
MARCO Carrier Pouch Options
The Marco Pouch is available for belt use, a MOLLE attachment system and a Kydex Pouch to carry. There is the Helium Whisper® Ten-Speed® Pouch for MARCO™ Dispenser, Ten-Speed® Belt Pouch Hanger for MARCO™ and Kydex Pouch for MARCO™ Dispenser available here for more information and details.
USING YOUR THUMB, PUSH ONE (1) MARKING STICK FORWARD SO THAT IT PROTRUDES OUT OF THE HOLE
LIFT ON THE PROTRUDING MARKING STICK UP UNTIL IT ACTIVATES
PULL THE GLOWING MARKING STICK OUT OF THE MARCO AND DEPLOY AS NEEDED
Injection-Molded Thermoplastic material
2” Marking sticks